Thermo-mechanical process modelling of industrially pultruded parts having UD and CFM layers

Ismet Baran, Jesper H. Hattel, Remko Akkerman

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

29 Downloads (Pure)

Abstract

Numerical process simulation of an industrially pultruded rectangular hollow profile is presented. The product contains the continuous filament mat (CFM) and the uni-directional(UD) roving layers made of glass/polyester. The distortion and stress evolutions together with the temperature and degree of fields are predicted by the simulation tool developed by the authors. The predicted deformation pattern at the end of the process is found to agree quite well with the one for the real pultruded part in a commercial pultrusion company. A parametric study is also performed based on the total volumetric shrinkage of the resin system during curing. The process induced residual stresses are calculated in the in-plane directions which have the potential to influence the internal stress levels during the service loading conditions
Original languageEnglish
Title of host publication16th European Conference on Composite Materials, ECCM 2014
Place of PublicationSeville
PublisherEuropean Conference on Composite Materials, ECCM
Pages-
ISBN (Print)978-000000000-2
Publication statusPublished - 22 Jun 2014
Event16th European Conference on Composite Materials, ECCM 2014 - Sevilla, Spain
Duration: 22 Jun 201426 Jun 2014
Conference number: 16

Publication series

Name
PublisherEuropean Conference on Composite Materials, ECCM

Conference

Conference16th European Conference on Composite Materials, ECCM 2014
Abbreviated titleECCM
CountrySpain
CitySevilla
Period22/06/1426/06/14

Keywords

  • IR-92119
  • METIS-305567

Fingerprint Dive into the research topics of 'Thermo-mechanical process modelling of industrially pultruded parts having UD and CFM layers'. Together they form a unique fingerprint.

Cite this