Tribological properties of graphene oxide sheets as water-based lubricant additive

Gangqiang Zhang, Xiangqiong Zeng, Tianhui Ren, Emile van der Heide

    Research output: Contribution to journalArticleAcademicpeer-review

    4 Citations (Scopus)

    Abstract

    Purpose: The purpose of this paper is to investigate the tribological performance of graphene oxide (GO) sheets as water-based lubricant additive when ultra-high molecular weight polyethylene (UHMWPE) plates slid against 316L stainless steel ball using a reciprocating tribometre.

    Design/methodology/approach: The factors influencing the tribological performance were considered, including the viscosity of the GO dispersion, normal load, sliding velocity and the roughness of UHMWPE. The surface microstructure and properties of UHMWPE were studied by means of scanning electron microscopy, laser confocal microscopy, Raman spectroscopy and contact angle measurements.

    Findings: The results revealed that the GO dispersion reduced friction and sliding-wear. The surface images of the wear UHMWPE plates indicated that GO sheets were prone to adsorption on the surface and form a thin physical tribofilms at the substrate.

    Originality/value: Based on the experimental findings for the evolution of the microstructure morphology and the development of subsurface cracks, less debris and cracking can be observed in the UHMWPE plates lubricated by GO dispersion.
    Original languageEnglish
    Pages (from-to)1025-1036
    Number of pages12
    JournalIndustrial Lubrication and Tribology
    Volume70
    Issue number6
    DOIs
    Publication statusPublished - 2018

    Keywords

    • UT-Hybrid-D
    • UHMWPE
    • Water lubrication
    • Graphene oxide
    • Wear

    Cite this