Water flow calibration facility in France (1 ml/h to 10 000 ml/h)

C. David, P. Claudel, Joost Conrad Lötters

    Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

    145 Citations (Scopus)
    60 Downloads (Pure)

    Abstract

    Through the world, the tendency to miniaturize all objects is spread widely. Concerning liquid flow metering, several manufacturers are already industrializing instruments specific for small flows. On a metrological point of view, few National Metrological Institutes (NMI) are able to calibrate flowmeters with liquid at flow rate smaller than 1 l.h-1 (2,8.10-7 m3.s-1). During the last five years, LNECETIAT (French NMI) was on progress to design and build a new calibration facility to ensure traceability to the international system of units. This paper will present the concepts and the first results obtained during the validation stage of this new standard.
    Original languageUndefined
    Title of host publicationProceedings of the 1st International Conference on Microfluidic Handling Systems
    Place of PublicationEnschede
    PublisherUniversity of Twente
    Pages68-71
    Number of pages4
    ISBN (Print)not assigned
    Publication statusPublished - 10 Oct 2012
    Event1st International Conference on MicroFluidic Handling Systems, MFHS 2012 - Enschede, Netherlands
    Duration: 10 Oct 201212 Oct 2012
    Conference number: 1
    https://www.utwente.nl/en/eemcs/mfhs2012/

    Publication series

    Name
    PublisherUniversity of Twente

    Conference

    Conference1st International Conference on MicroFluidic Handling Systems, MFHS 2012
    Abbreviated titleMFHS
    CountryNetherlands
    CityEnschede
    Period10/10/1212/10/12
    Internet address

    Keywords

    • EWI-22797
    • IR-83477
    • METIS-293277

    Cite this