Search everything

52 Downloads (Pure)

On Anisotropy, Objectivity and Invariancy in finite thermo–mechanical deformations

Huetink, H., 2006, p. 355-358. 4 p.

Research output: Contribution to conferencePaperAcademic

File

Compartamento plastico do material: um dado importante para prever a estampagem de chapas

Vegter, H., ten Horn, C. H. L. J., An, Y., Atzema, E. H., Pijlman, H. H., van den Boogaard, A. H. & Huetink, H., 2006, In : Corte e conformacao de metais. 12, p. 50-69

Research output: Contribution to journalArticleAcademicpeer-review

Finite element simulation of viscoelastic flow through a converging channel

Rekers, G., Akkerman, R. & Huetink, H., 18 Jun 1995, Proceedings of the fifth International conference on Numerical Methods in Industrial Forming Processes. Ithaca, New York, USA, p. 1047-1052

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Optimizing the Post Sandvik Nanoflex material model using inverse optimization and the finite element method.

van Amstel, T., Groen, M., Post, J. & Huetink, H., 2005, Proceedings of the 8th Esaform Conference on Material Forming. Banabic, D. (ed.). Cluj-Napoca, Romania, p. 167-170

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

On adaptive mesh refinement in wrinkling prediction analysis

Selman, A., Meinders, V. T., van den Boogaard, A. H. & Huetink, H., 2002, the 5th International ESAFORM conference on Material Forming. Pietrzyk, M., Mitura, Z. & Kaczmar, J. (eds.). Krakow, Poland, p. 551-554

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Aspect of lagrangian-eulerian formulation

Huetink, H., Akkerman, R., Mooi, H. G. & Rekers, G., 18 Jun 1995, Proceedings of the fifth International conference on Numerical methods in Industrial Forming Processes. Ithaca, New York, USA, p. 67-76

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finitie element simulations of aluminium extrusion

Mooi, H. G., 13 Dec 1996, Enschede: Universiteit Twente. 168 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Implementation of plastic thickness strain in an equivalent drawbead model based on a penalty constraint method

Meinders, V. T., Geijselaers, H. J. M. & Huetink, H., 22 Jun 1998, Proceedings of the 6th International conference on Numerical Methods in Industrial forming processes - Numiform '98. Enschede, p. 911-916

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Prediction of sheet necking with shell finite element models

van den Boogaard, A. H. & Huetink, H., 28 Apr 2003, 6th Esaform Conference on Material Forming, ESAFORM. Brucato, V. (ed.). Salerno, Italy: Nuova Ipsa Editore srl, p. 191-194 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Deformation of and Transformation in Metastable Steels

Datta, K., Geijselaers, H. J. M., Huetink, H. & Post, J. A., 2001, p. -.

Research output: Contribution to conferencePoster

83 Downloads (Pure)

Characterisation and modelling of the plastic material behaviour and its application in sheet metal forming simulation

Vegter, H., ten Horn, C. H. L. J., An, Y., Atzema, E. H., Atzema, E. H., Pijlman, H. H., van den Boogaard, A. H. & Huetink, H., 7 Apr 2003, 7th International Conference on Computational Plasticity, COMPLAS VII. Onate, E. & Owen, D. R. J. (eds.). Barcelona: CIMNE Barcelona, p. - 20 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Sheet metal
Plastics
Automotive industry
Strain hardening
6 Citations (Scopus)

Iterative springback compensation of NUMISHEET benchmark #1

Lingbeek, R. A., Huetink, H., Ohnimus, S. & Weiher, J., 2005, Numisheet 2005. Smith, L. M., Pourboghrat, F., Yoon, J. W. & Stoughton, T. B. (eds.). Detroit, USA: American Institute of Physics, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The effect of particle size in PP/EPR blends on the brittle/ducitle transition temperature at low and high test speed

van der Wal, A., Gaymans, R. J., Huetink, H. & Dijkstra, P. T. S., 11 Feb 1998, ACS National Meeting, Division of Polymeric Materials: Science & Engineering (PMSE). Boston, USA, p. - 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

22 Downloads (Pure)

The modeling of compression tests with a physically based material model using finite elements

Rietman, B., Owen, D. R. J. (ed.), Oñate, E. (ed.), van Liempt, P., Hinton, E. (ed.) & Huetink, H., 1997, p. 965-972.

Research output: Contribution to conferencePaperAcademic

File

Finite element simulation of aluminum sheet warm forming using alflow hardening model

Kurukuri, S., van den Boogaard, A. H. & Huetink, H., 5 Sep 2007, Computational Plasticity IX - Fundamentals and Applications (COMPLAS 2007), 5-7 September 2007, Barcelona, Spain. Onate, E., Owen, D. R. J. & Suarez, B. (eds.). Barcelona, Spain: CIMNE, p. 635-638

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stable incremental deformation of a strip to high strain

Hadoush, A., van den Boogaard, A. H. & Huetink, H., 2007, In : Key engineering materials. 344, p. 615-620

Research output: Contribution to journalArticleAcademicpeer-review

3D FEM simulations of a shape rolling process

Wisselink, H. H., Huetink, H., Leeuwen, A. & van Dijk, M., 2001, Proceedings of the 4th International ESAFORM Conference on Material Forming. Habraken, A. M. (ed.). p. 843-846

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

15 Downloads (Pure)

The arbitrary Lagrangian-Eulerian method on grids of triangular elements: a new convection scheme

van Haaren, M. J., van den Boogaard, A. H., Stoker, H. C. & Huetink, H., 1999. 4 p.

Research output: Contribution to conferencePaperAcademic

File
137 Downloads (Pure)

Developments of the arbitrary lagrangian-eulerian method in non-linear solid mechanics applications to forming processes

Stoker, H. C., 26 Feb 1999, Enschede: Universiteit Twente. 152 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File

Equivalent drawbead performance in deep drawing simulations

Meinders, V. T., Geijselaers, H. J. M. & Huetink, H., 26 Jan 1999, Proceedings of Numisheet '99. p. 243-248

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Contact behaviour modelled with interface elements and tool description

Vreede, P. T., Louwes, M. F. M., Huetink, J. & Langerak, N. A. J., 14 Sep 1992, NUMIFORM 92 : numerical methods in industrial forming processes: proceedings of the 4th International Conference on Numerical Methods in Industrial Forming Processes. Chenot, J. L., Zienkiewicz, O. C. & Wood, R. D. (eds.). Rotterdam: A.A. Balkema

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Contact behaviour modelled with interface element and tool description

Vreede, P. T., Louwes, M. F. M., Huetink, J. & Langerak, N. A. J., 1 Sep 1992, NUMIFORM 92 : numerical methods in industrial forming processes: proceedings of the 4th International Conference on Numerical Methods in Industrial Forming Processes. Chenot, J. L., Zienkiewicz, O. C. & Wood, R. D. (eds.). Rotterdam: A.A. Balkema, p. 565-570 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Evaluation of stresses in a combined plane strain-simple shear test.

van den Boogaard, A. H., van Riel, M. & Huetink, H., 2005, Proceedings of the 8th Esaform Conference on Material Forming. Banabic, D. (ed.). Cluj-Napoca, Roemenie: ESAFORM, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

247 Downloads (Pure)

Shape distortions in composites forming

Wijskamp, S., 2005, Enschede: University of Twente. 171 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Open Access
File

Finite element modelling of concurrent deformation and transformation in metastable steels

Datta, K., Datta, K., Post, J. A., Geijselaers, H. J. M. & Huetink, H., 28 May 2002, ABAQUS World Users Conference. New Port, RI, USA, p. - 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Special friction tester for measurement under sheet metal forming contact conditions

ter Haar, R., Carleer, B. D., Schipper, D. J., Huetink, H., Vegter, H. & Broekhof, N. L. J. M., 1 Apr 1996, Sheet Metal '96, Proceedings of the International conference, vol. 1. Enschede, p. 357-366

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

14 Downloads (Pure)

An algorithm to make your implicit code competitive with an explicit code for large scale problems

Meinders, V. T., van den Boogaard, A. H. & Huetink, H., 2002. 6 p.

Research output: Contribution to conferencePaperAcademic

File

Adaptive Numerical analysis of Wrinkling in Sheet metal Forming

Selman, A., Meinders, V. T., van den Boogaard, A. H. & Huetink, H., 2003, In : International journal of forming processes. 6, nr. 1, p. 87-103 17 p.

Research output: Contribution to journalArticleAcademicpeer-review

3 Citations (Scopus)

Stable incremental deformation of a strip in high strain, Advanced materials research

Hadoush, A., van den Boogaard, A. H. & Huetink, H., 1 Apr 2007, Sheet metal 2007. Micari, F., Geiger, M., Duflou, J., Shirvani, B., Clarke, R., Di Lorenzo, R. & Fratini, L. (eds.). Stafa, Switserland: Trans Tech Publications Ltd, p. 615-620

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Virtual tool reworking. New strategies in die design using finite element forming simulations

Lingbeek, R. A., 18 Apr 2008, Enschede, The Netherlands: University of Twente. 124 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

166 Downloads (Pure)

Thermally Enhanced Forming of Aluminium Sheet. Modelling and experiments

van den Boogaard, A. H., 6 Dec 2002, Wageningen: Ponsen & Looijen. 159 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
32 Downloads (Pure)

A mixed elastoplastic / rigid-plastic material model

Huetink, H., van den Boogaard, A. H., Rietman, B., Lof, J. & Meinders, V. T., 29 Jun 1998, 4th International World congres on Computational Mechanics, uitgegeven op CD-Rom. Buenos Aires, Argentine: International Association of Computational Mechanics, IACM, p. - 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File

CAD implementation of design rules for aluminium extrusion dies

van Ouwerkerk, G., 16 Apr 2009, Enschede, The Netherlands: University of Twente. 126 p.

Research output: ThesisPhD Thesis - Research external, graduation UT

A modified barrier approach to contact problems

Kloosterman, G., van den Boogaard, A. H. & Huetink, H., 2001, Simulations of Materials Processing: Theory, Methods and Applications. Mori, K-I. (ed.). Toyohashi, Japan, p. 97-102

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

22 Downloads (Pure)

Implementation of an anisotropic damage material model for non-proportional loading

Niazi, M. S., Wisselink, H. H., Meinders, V. T. & Huetink, H., 2 Sep 2009, Computational Plasticity X - Fundamentals and Applications (COMPLAS 2009), 2-4 September 2009, Barcelona, Spain. Onate, E. & Owen, D. R. J. (eds.). CIMNE, Barcelona: E. Onate and D.R.J. Owen, p. 1-4 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
43 Citations (Scopus)

3D FEM simulation of stationary metal forming processes with applications to slitting and rolling

Wisselink, H. H. & Huetink, H., 2004, In : Journal of materials processing technology. 148, 3, p. 328-341

Research output: Contribution to journalArticleAcademicpeer-review

25 Downloads (Pure)

Modelling of aluminium sheet material at elevated temperatures

Haaren, L., van den Boogaard, A. H. & Huetink, H., 2004. 4 p.

Research output: Contribution to conferencePaperAcademic

File
33 Downloads (Pure)

Modelling of ductile failure in metal forming

Wisselink, H. H. & Huetink, J., 14 May 2009, p. 1-10.

Research output: Contribution to conferencePaperAcademicpeer-review

Open Access
File
Metal forming
Subroutines
35 Downloads (Pure)

Influence of numerical parameters on springback prediction in sheet metal forming

Burchitz, I. A., Meinders, V. T. & Huetink, H., 2006, p. 407-410.

Research output: Contribution to conferencePaperAcademic

File
1 Citation (Scopus)

Constitutive modeling of metastable austenitic stainless steel

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huetink, H., 2009, In : International journal of material forming. 2, Suppl 1, p. 419-422 4 p.

Research output: Contribution to journalArticleAcademicpeer-review

20 Downloads (Pure)

3D FEM simulation of shape rolling using an ale method

Wisselink, H. H. & Huetink, H., 7 Apr 2003, 7th International Conference on Computational Plasticity, COMPLAS VII. Onate, E. & Owen, D. R. J. (eds.). Barcelona: CIMNE Barcelona, p. CD-rom-18 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Finite element method
Relocation
Stators
Topology
38 Downloads (Pure)

Non-proportional tension-shear experiments in a biaxial test facility

van Riel, M., van den Boogaard, A. H. & Huetink, H., 2006, p. 323-326.

Research output: Contribution to conferencePaperAcademic

File

Comportamento pl'astico do material: um dado importante para prever a estampagem de chapas

Vegter, H., ten Horn, C. H. L. J., An, Y., Atzema, E. H., Pijlman, H. H., van den Boogaard, A. H. & Huetink, H., 2006, In : Corte e conformacao de metais. 12, p. 50-69

Research output: Contribution to journalArticleAcademic

14 Downloads (Pure)

Finite element simulation of aluminum sheet warm forming using alflow hardening model

Kurukuri, S., van den Boogaard, A. H. & Huetink, H., 2007, p. 635-638. 4 p.

Research output: Contribution to conferencePaperAcademic

File
5 Citations (Scopus)

Meshless methods and forming processes

Quak, W., van den Boogaard, A. H. & Huetink, H., 27 Apr 2009, In : International journal of material forming. 2, suppl. 1, p. 585-588 4 p.

Research output: Contribution to journalArticleAcademicpeer-review

58 Downloads (Pure)

Iterative springback compensation of NUMISHEET benchmark #1

Lingbeek, R. A., Huetink, H., Ohnimus, S. & Weiher, J., 2005. 6 p.

Research output: Contribution to conferencePaperAcademic

File
23 Downloads (Pure)

Constitutive modeling of metastable austenitic stainless steel (CD-rom)

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huetink, H., 23 Apr 2008, 11th ESAFORM 2008 conference on material forming, 23-25 April 2008, Lyon, France. Boisse, P. (ed.). Lyon, France: Springer, p. - 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
6 Downloads (Pure)

A comparison between optimisation algorithms for metal forming processes

Bonte, M. H. A., Do, D. T. D., Fourment, L., van den Boogaard, A. H., Huetink, H. & Habbal, A., 2006, ESAFORM 2006. Juster, N. & Rosochowski, A. (eds.). Glasgow: Publishing House AKAPIT, p. 883-886 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Metal forming
Forging
15 Downloads (Pure)

Iterative solvers in forming process simulations

van den Boogaard, A. H., Rietman, B. & Huetink, H., 22 Jun 1998, Proceedings of the 6th International conference on Numerical Methods in Industrial forming processes - Numiform '98. Enschede: Balkema, p. 219-224 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Data storage equipment