Search everything

A geometrical-based contact algorithm using a barrier method

Kloosterman, G., van Damme, R. M. J., van den Boogaard, A. H. & Huetink, H., 2001, In : International journal for numerical methods in engineering. 51(7), 7, p. 865-882

Research output: Contribution to journalArticleAcademicpeer-review

17 Citations (Scopus)

Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Quak, W., Akkerman, R. & Huetink, H., 27 Apr 2011, The 14th International ESAFORM Conference on Material Forming 2011 Proceedings. Menary, G. (ed.). Belfast: AIP Conference Proceedings, p. 1290-1295 (AIP Conference Proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

Efficient implicit finite element analysis of sheet forming processes

van den Boogaard, A. H., Meinders, V. T. & Huetink, H., 2003, In : International journal for numerical methods in engineering. 56, 8, p. 1083-1107 24 p.

Research output: Contribution to journalArticleAcademicpeer-review

11 Citations (Scopus)
1 Downloads (Pure)

Influence of copolymerisation on fracture behaviour of aliphatic polyketones

Zuiderduin, W. C. J., Homminga, D. S., Homminga, D. S., Huetink, H. & Gaymans, R. J., 2005, In : Polymer. 46, 11, p. 1921-1934

Research output: Contribution to journalArticleAcademicpeer-review

8 Citations (Scopus)

Rigid particle toughening of aliphatic polyketone

Zuiderduin, W. C. J., Huetink, H. & Gaymans, R. J., 2006, In : Polymer. 47, 16, p. 5880-5887 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

31 Citations (Scopus)

An optimisation strategy for industrial metal forming processes

Bonte, M. H. A., van den Boogaard, A. H. & Huetink, H., 2008, In : Structural and multidisciplinary optimization. 35, 6, p. 571-586

Research output: Contribution to journalArticleAcademic

File
43 Citations (Scopus)
55 Downloads (Pure)

Mould filling analysis of aluminium extrusion dies

Koopman, A. J., Geijselaers, H. J. M. & Huetink, H., 13 Jun 2010, Numiform 2010 Proceedings of the 10th international conference AIP 1252. Barlat, F., Moon, Y. H. & Lee, M. G. (eds.). Pohang, Korea: American Institute of Physics, p. 290-295 (AIP Conference Proceedings; vol. 1252).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A Multi-scale Friction Model for Sheet Metal Forming Simulations

Hol, J., Cid Alfaro, M. V., Meinders, V. T. & Huetink, H., 21 Aug 2011, AIP Conference Proceedings Volume 1383. Chang, K., Nam Han, H., Huh, H., Barlat, F. & Lee, M. (eds.). Seoul: AIP, p. 784-791 (AIP Conference Proceedings; vol. 1383).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Free surface modeling of contacting solid metal flows employing the ALE formulation

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Akkerman, R. & Huetink, H., 14 Mar 2012, The 15th International ESAFORM Conference on Material Forming 2011 Proceedings. Merklein, M. & Hagenah, H. (eds.). Erlangen: Trans Tech Publications Ltd, p. 431-436

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
1 Downloads (Pure)

A SUPG approach for determining frontlines in aluminium extrusion simulations and a comparison with experiments

Koopman, A. J., Geijselaers, H. J. M., Huetink, H., Nilsen, K. E. & Koenis, P. T. G., 18 Apr 2007, Proceedings 10th ESAFORM Conference on Material Forming, 18-20 April 2007, Zaragoza, Spain. Cueto, E. & Chinesta, F. (eds.). Zaragoza, Spain: American Institute of Physics, p. 602-607 (AIP conference proceedings; vol. 907).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

Design and optimization of vertex detector foils by superplastic forming

Snippe, Q. H. C., 16 Mar 2011, Zutphen: Wohrmann Print Service. 194 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
38 Downloads (Pure)

Simulation of Steady Laser Hardening by an Arbitrary Lagrangian Eulerian Method

Geijselaers, H. J. M. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Ghosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 1514-1519 (AIP Conference Proceedings; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

CAD implementation of design rules for aluminium extrusion dies

van Ouwerkerk, G., 16 Apr 2009, Enschede: University of Twente. 126 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
1589 Downloads (Pure)

On meshless and nodal-based numerical methods for forming processes

Quak, W., 7 Oct 2011, Enschede, The Nejherlands: University of Twente. 160 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
67 Downloads (Pure)

Advanced friction modeling in sheet metal forming

Hol, J., Cid Alfaro, M. V., Meinders, V. T. & Huetink, H., 2011, In : Key engineering materials. 473, Sheet Metal 2011, p. 715-722 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

File
4 Citations (Scopus)
90 Downloads (Pure)

Modelling of aluminium sheet forming at elevated temperatures

van den Boogaard, A. H. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Ghosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 893-898 (AIP Conference Proceedings; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
15 Downloads (Pure)

FEM simulation of multi step forming of thick sheet

Wisselink, H. H. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Chosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 899-904 (AIP Conference Proceedings; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Modelling the material behaviour of metastable stainless

Datta, K., Geijselaers, H. J. M., Post, J., Beyer, J. & Huetink, J., 2007, Materials processing and design: modeling, simulation and applications: NUMIFORM '07 : proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17-21 June, 2007. César de Sá, J. M. A. & Santos, A. D. (eds.). Melville, NY: American Institute of Physics, p. 655-660 6 p. (AIP Conference Proceedings; vol. 908, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
11 Downloads (Pure)

Adaptive through-thickness integration strategy for shell elements

Burchitz, I. A., Meinders, T. & Huetink, J., 2007, Materials processing and design: modeling, simulation and applications: NUMIFORM '07 : proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17-21 June, 2007. César de Sá, J. M. A. & Santos, A. D. (eds.). Melville, NY: American Institute of Physics, p. 699-704 (AIP Conference Proceedings; vol. 908, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

On the modeling of hardening in metals during non-proportional loading.

Wang, J., Levkovitch, V., Reusch, F., Svendsen, B., Huetink, H. & van Riel, M., 2008, In : International journal of plasticity. 24, 6, p. 1039-1070

Research output: Contribution to journalArticleAcademicpeer-review

49 Citations (Scopus)

Analysis tools for the design of aluminium extrusion dies

Koopman, A. J., 11 Jun 2009, Enschede, The Netherlands: University of Twente. 152 p.

Research output: ThesisPhD Thesis - Research external, graduation UT

File
251 Downloads (Pure)

Influence of plastic strain on mechanically induced martensitic transformations

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huétink, J., 25 Jan 2010, International Conference on Martensitic Transformations (ICOMAT). Olson, G. B., Lieberman, D. S. & Saxena, A. (eds.). Wiley, p. 614-620 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Lubrication in cold rolling: Numerical simulation using multigrid techniques

Lugt, P. M., 25 Sep 1992, Enschede: University of Twente. 186 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
15 Downloads (Pure)

Toughening of polypropylene with calcium carbonate particles

Zuiderduin, W. C. J., Westzaan, C., Huetink, H. & Gaymans, R. J., 2003, In : Polymer. 44, 1, p. 261-275

Research output: Contribution to journalArticleAcademic

520 Citations (Scopus)

Constitutive behaviour of the metastable stainless steel: Sandvik Nanoflextm

Post, J., Datta, K. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Chosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 1670-1675 (AIP Conference Proceedings; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

21 Downloads (Pure)

Comparison of experimental AA6063 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model

van de Langkruis, J., Lof, J., Kool, W. H., van der Zwaag, S. & Huetink, H., 2000, In : Computational materials science. 18, 18, p. 381-392

Research output: Contribution to journalArticleAcademicpeer-review

29 Citations (Scopus)

Numerical forming simulations and optimisation in advanced materials

Huetink, J., van den Boogaard, A. H., Geijselaers, H. J. M. & Meinders, T., 2007, Materials processing and design: modeling, simulation and applications: NUMIFORM '07 : proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17-21 June, 2007. César de Sá, J. M. A. & Santos, A. D. (eds.). Melville, NY: American Institute of Physics, p. 281-286 (AIP Conference Proceedings; vol. 908, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

37 Downloads (Pure)

Modelling of failure in sheet forming using cohesive elements

Wisselink, H. H. & Huetink, H., 19 Jul 2010, Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian PAcific Congress on Computational Mechanics. Khalili, N., Valliappan, S., Li, Q. & Russell, A. (eds.). Sydney, Australia: Centre for Infrastructure Engineering and Safety, p. 189-190 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
14 Downloads (Pure)

FE calculations on a three stage metal forming process of Sandvik Nanoflextm

Voncken, R. M. J., van der Sluis, O., Post, J. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Chosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 469-474

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Consitutive modeling of metastable austenitic stainless steel

Perdahcioglu, E. S. & Perdahcioglu, E. S., 17 Dec 2008, Enschede, The Netherlands: University of Twente. 145 p.

Research output: ThesisPhD Thesis - Research external, graduation UT

File
247 Downloads (Pure)

Efficient simulation and process mechanics of incremental sheet forming

Hadoush, A., 1 Jul 2010, Enschede: University of Twente. 120 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
205 Downloads (Pure)

Solving optimisation problems in metal forming using Finite Element simulation and metamodelling techniques

Bonte, M. H. A., van den Boogaard, A. H. & Huetink, J., 2005, Proceedings of the First Inveted COST 526 (APOMAT), Conference for Automatic Process Optimization in Materials Technology. Buche, D. & Hofmann, N. (eds.). Morschach, Switzerland, p. 242-251 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
21 Downloads (Pure)

Failure Predictions for DP Steel Cross-die Test Using Anisotropic Damage

Niazi, M. S., Wisselink, H. H., Meinders, V. T. & Huetink, H., 2012, In : International journal of damage mechanics. 21, 5, p. 713-754 42 p.

Research output: Contribution to journalArticleAcademicpeer-review

17 Citations (Scopus)

On the design of lubricant free piston compressors

Owczarek, P., 17 Sep 2010, Enschede: University of Twente. 131 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
160 Downloads (Pure)

A DACE study on a three stage metal forming process made of Sandvik NanoflexTM

Post, J., Klaseboer, G., Stinstra, E. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Chosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 475-480 (AIP Conference Proceedings; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Building a WebVR environment to bring historical shipping data alive

Calisto, L. F., Dobraja, I., Gu, Y., Weber, A., van Lottum, J., Huetink, M. & Kraak, M. J., 31 Aug 2018, p. 1. 1 p.

Research output: Contribution to conferenceAbstract

Open Access
File
20 Downloads (Pure)

FEM simulations of a multi stage forming process on Sandvik maraging steel 1RK91 describing the stress assisted and the strain induced martensite transformation

Post, J., Huétink, J., Geijselaers, H. J. M. & Voncken, R. M. J., Oct 2003, In : Journal De Physique. IV : JP. 112, p. 417-420 4 p.

Research output: Contribution to journalArticleAcademicpeer-review

3 Citations (Scopus)

Exit report modelling of sheet metal forming: (Project ME97033)

Selman, A., 2001, Enschede: University of Twente. 6 p. (NIMR report)

Research output: Book/ReportReportOther research output

File
20 Downloads (Pure)

Computational optimisation of robust sheet forming processes

van den Boogaard, A. H., Tisza, M. (ed.), Bonte, M. H. A. & van Ravenswaaij, R., 2007. 8 p.

Research output: Contribution to conferencePaper

File
13 Downloads (Pure)

Aspects of approximate optimisation: overcoming the curse of dimensionality and design of experiments

Trichon, S., Bonte, M. H. A., Ponthot, J-P. & van den Boogaard, A. H., 2007. 8 p.

Research output: Contribution to conferencePaper

File
16 Downloads (Pure)

Compensating springback in the automotive practice using MASHAL

Ohnimus, S., Petzoldt, M., Rietman, B. & Weiher, J., 2005.

Research output: Contribution to conferencePaper

File
8 Citations (Scopus)
48 Downloads (Pure)

Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes

Bonte, M. H. A., van den Boogaard, A. H. & Veldman, E., 2007, p. 3-8.

Research output: Contribution to conferencePaper

File
34 Downloads (Pure)

Constitutive modelling of UD reinforced thermoplastic laminates

Haanappel, S. P., ten Thije, R. H. W. & Akkerman, R., 11 Jul 2010, p. 1-6.

Research output: Contribution to conferencePaper

Open Access
File
88 Downloads (Pure)

Non-proportional deformation paths for sheet metal - experiments

van den Boogaard, A. H. & van Riel, M., 3 Jan 2010, Finite plasticity and visco-plasticity of conventional and emerging materials. Khan, A. S. & Farrokh, B. (eds.). St. Kitts: NEAT Press, p. 223-225

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
23 Downloads (Pure)

Viscoplastic Regularization of Local Damage Models: A Latent Solution

Niazi, M. S., Wisselink, H. H. & Meinders, V. T., 14 Mar 2012, In : Key engineering materials. 504-506, p. 845-850

Research output: Contribution to journalArticleAcademicpeer-review

File
3 Citations (Scopus)
177 Downloads (Pure)

Numerical flow front tracking for aluminium extrusion of a tube and a comparison with experiments

Koopman, A. J., Geijselaers, H. J. M., Nilsen, K. E. & Koenis, P. T. G., 2008. 4 p.

Research output: Contribution to conferencePaper

File
1 Citation (Scopus)
39 Downloads (Pure)

Finite element analysis of deep drawing

Carleer, B. D., 1997, Enschede: University of Twente. 152 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Open Access
File
6 Citations (Scopus)
45 Downloads (Pure)

Material modelling of sheet metal by bi-axial experiments

Pijlman, H. H., 2001. 1 p.

Research output: Contribution to conferencePaper

File
16 Downloads (Pure)

Wrinkling prediction procedure in thin sheet metal forming processes with adaptive mesh refinement: Part 2: wrinkling with contact

Selman, A., 2001, Enschede: University of Twente. 18 p. (NIMR report)

Research output: Book/ReportReportOther research output

File
20 Downloads (Pure)

Wrinkling prediction procedure in thin sheet metal forming processes with adaptive mesh refinement: Part 1: contact free wrinkling

Selman, A., 2001, Enschede: University of Twente. 28 p. (NIMR report)

Research output: Book/ReportReportOther research output

File
31 Downloads (Pure)