Search everything

Improvements in FE-analysis of real-life sheet metal forming

Huetink, H., van den Boogaard, A. H., Geijselaers, H. J. M. & Meinders, V. T., 14 Dec 2000, European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000, published on CD-ROM. Barcelona, Spain, p. - 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
18 Downloads (Pure)

The Implementation of the Vegter yield Criterion and a physically based hardening rule in Finite Elements

Pijlman, H. H., Huetink, H., Meinders, V. T., Carleer, B. D., Carleer, B. D. & Vegter, H., 29 Jun 1998, 4th International World congres on Computational Mechanics (IACM '98), uitgegeven op CD-rom. Buenos Aires, Argentine, p. - 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
44 Downloads (Pure)

Material Modelling based on comparison between simulations and experiment

Koopman, A. J., Geijselaers, H. J. M. & Huetink, J., 11 Oct 2007, p. P32-P32. 1 p.

Research output: Contribution to conferencePoster

Open Access
File
3 Downloads (Pure)

Numerical simulation of the aluminium extrusion process

Lof, J. & Huetink, H., 26 Jan 1999, Proceedings of the 2nd ESAFORM Conference on Material Forming. p. 29-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Accurate simulation of springback using adaptive integration

Burchitz, I., Meinders, T. & Huetink, J., 11 Oct 2007, p. P10-P10. 1 p.

Research output: Contribution to conferencePoster

Open Access
File
8 Downloads (Pure)

The development of a finite elements based springback compensation tool for sheet metal products.

Lingbeek, R. A., Huetink, H., Ohnimus, S., Petzoldt, M. & Weiher, J., 2005, In : Journal of materials processing technology. 1, 169, p. 115-125 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

File
93 Citations (Scopus)
234 Downloads (Pure)

Prediction of the bendability of sheet metals using nonlocal damage models

Wisselink, H. H. & Huetink, H., 2008, p. 217-224. 8 p.

Research output: Contribution to conferencePaper

File
21 Downloads (Pure)

The deformation of a flat die in aluminum extrusion

Assaad, W., Geijselaers, B. & Huetink, J., 2008. 1 p.

Research output: Contribution to conferencePoster

Open Access
File
4 Downloads (Pure)

Oil-free piston compressors

Owczarek, P., Geijselaers, H. J. M. & Huetink, J., 11 Oct 2007, p. P45-P45. 1 p.

Research output: Contribution to conferencePoster

Open Access
File
3 Downloads (Pure)

Closing the gap between the workshop and numerical simulation in sheet metal forming, Computational methods in applied sciences

Carleer, B. D. & Huetink, H., 29 Feb 1996, Proceedings Eccomas '96. p. 554-560

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite Element Modelling of Bends and Creases during Folding Ultra Thin Stainless Steel Foils

Datta, K., Akagi, H., Geijselaers, H. J. M. & Huetink, H., 2003. 9 p.

Research output: Contribution to conferencePaper

File
27 Downloads (Pure)

A finite element method for simulation of 3-dimensional sheet metal forming

Vreede, P. T., 23 Jan 1992, Enschede. 145 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Improving numerical predictability of Springback [poster]

Burchitz, I. A., Meinders, V. T. & Huetink, H., 2004.

Research output: Contribution to conferencePaper

File
10 Downloads (Pure)

Simulation of springback: adaptive quadrature [poster]

Burchitz, I. A., Meinders, V. T. & Huetink, H., 2007.

Research output: Contribution to conferencePaper

File
14 Downloads (Pure)

Finite element analysis of forward/backward extrusion using ALE techniques

Atzema, E. H. & Huetink, H., 18 Jun 1995, Proceedings of the fifth International conference on Numerical Methods in Industrial Forming Processes. Ithaca, New York, USA, p. 383-388

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Formability of sheet metal and sandwich laminates

Atzema, E. H., 11 Feb 1994, Enschede: Universiteit Twente. 159 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

FE simulation of compression tests for parameter identification

Huetink, H. & Rietman, B., 17 Mar 1998, First ESAFORM conference on Material Forming. Sophia Antipolis, France, p. 13-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Simulation of complex aluminium extrusion using an arbitrary eulerian langrangian formulation

Mooi, H. G. & Huetink, H., 18 Jun 1995, Proceedings of the fifth International Conference on Numerical Methods in Industrial Forming Processes. Ithaca, New York, USA, p. 869-874

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Isothermal simulation of an aluminum extrusion process with a multi-hole die

Assaad, W., Geijselaers, H. J. M. & Huetink, J., 11 Oct 2007, p. P4-P4. 1 p.

Research output: Contribution to conferencePoster

Open Access
File
4 Downloads (Pure)

Flow front tracking in aluminium extrusion dies by means of particle trajecteris

Koopman, A. J., Geijselaers, H. J. M. & Huetink, H., 26 Oct 2006, p. -. 1 p.

Research output: Contribution to conferencePoster

File
9 Downloads (Pure)

FEM simulation Benchmark test 2D draw bending

Atzema, E. H. & Huetink, H., 31 Aug 1993, Proceedings of the 2nd International Conference Numisheet '93. Addendum, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Adaptive through-thickness integration for shell elements

Burchitz, I. A., Meinders, V. T. & Huetink, H., 26 Oct 2006, p. -.

Research output: Contribution to conferencePoster

File
6 Downloads (Pure)

Simulation of Materials Processing: Theory, Methods and Applications: Numiform '98

Huetink, H. & Baaijens, F. P. T., 1998, Rotterdam/Brookfield: A.A. Balkema. 993 p.

Research output: Book/ReportBookAcademic

Morphological Study of Strained Polypropylene

Dijkstra, P. T. S., van Dijk, D. J. & Huetink, H., 16 Jun 2002, Polymer Processing Society, 18th Annual Meeting, (PPS-18). White, J. L. (ed.). Guimaraes, Portugal, p. 160-160 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The arbitrary Lagrangian-Eulerian method in large de formation problems, Numerical methods in engineering '96

Stoker, H. C. & Huetink, H., 29 Feb 1996, Proceedings Eccomas '96. p. 184-189

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Strain path sensitivity in DC06 mild steel

van Riel, M., van den Boogaard, A. H. & Huetink, J., 11 Dec 2006. 1 p.

Research output: Contribution to conferencePoster

Open Access
File
4 Downloads (Pure)

Constitutive behaviour in strainpath sensitive sheet metal

van Riel, M., van den Boogaard, A. H. & Huetink, H., 26 Oct 2006, p. -. 1 p.

Research output: Contribution to conferencePoster

File
11 Downloads (Pure)

The Arbitrary Lagrangian-Eulerian method with a finite volume remap technique

Stoker, H. C. & Huetink, H., 24 Mar 1996, Proceedings NUPHYMAT '96, CEMEF, Ecole des Mines de Paris. Sophia Antipolis, p. 65-69

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Numerical modelling of shape aberrations due to blanking

van de Moesdijk, R. D., 10 Dec 1999, Enschede: Universiteit Twente. 168 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Thermal effects in yield and softening behavior of polymers

Zuiderduin, W. C. J., Huetink, H. & Gaymans, R. J., 25 Feb 2002, p. -.

Research output: Contribution to conferencePoster

Melth Layer in ductile fracture of PP-EPDM blends

Dijkstra, P. T. S., Bosch, M. S., Gaymans, R. J. & Huetink, H., 16 May 1999, Sixth European Symposium on Polymer Blends. MAINZ (D), p. 71-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Advanced mechanical testing on aluminium alloys and low carbon steels for sheet forming

Vegter, H., An, Y., Pijlman, H. H. & Huetink, H., 27 Jan 1999, Proceedings of Numisheet '99. p. 3-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Effective and efficient contact modelling in numerical simulations

Carleer, B. D., Atzema, E. H. & Huetink, H., 22 Jun 1998, Proceedings of the 6th International conference on Numerical Methods in Industrial forming processes - Numiform '98. Enschede, p. 187-194

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Euler-Lagrange simulations of nonisothermal viscoelastic flows

Akkerman, R., 10 Dec 1993, Enschede: Universiteit Twente. 155 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Hydration of slag cement: theory, modeling and application

Chen, W., 2006, Enschede: University of Twente. 223 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
152 Downloads (Pure)

Thematic issue: Material models for sheet metal forming

van den Boogaard, T., Meinders, T. & Huétink, H., 1 Jun 2011, In : International journal of material forming. 4, 2, 1 p., 83.

Research output: Contribution to journalEditorialAcademicpeer-review

Open Access
File
19 Downloads (Pure)

Investigation of the ALE-method in the simulation of metal forming processes

Stoker, H. C. & Huetink, H., 29 Jun 1998, 4th International World Congress on Computational Mechanics, IACM '98, uitegegeven op CD-rom. Buenos Aires, Argentine, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Simulation of the slitting process with the finite element method

Wisselink, H. H. & Huetink, H., 27 Jan 1999, Proceedings of the 7th International Conference on Sheet Metal. p. 143-152

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

52 Citations (Scopus)

Optimisation strategies for metal forming processes

Bonte, M. H. A., 29 Jun 2007, Enschede: University of Twente. 254 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
119 Downloads (Pure)

Simulation of stationary sheet metal cutting processes

Wisselink, H. H. & Huetink, H., 22 Jun 1998, Proceedings of the 6th International conference on Numerical Methods in Industrial forming Processed - Numiform '98. Enschede, p. 985-990

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Tool deformation during the shape rolling of stator vanes

Wisselink, H. H. & Huetink, H., 14 Apr 2002, 5th International ESAFROM Conference on Material forming. Pietrzyk, M., Mitura, Z. & Kaczmar, J. (eds.). Krakow, Poland, p. 371-374 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Constitutive modeling of metastable austenitic stainless steel

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huetink, J., 11 Oct 2007, p. P49-P49. 1 p.

Research output: Contribution to conferencePoster

Open Access
File
13 Downloads (Pure)

Simulation of the deep drawing process: a hierarchical method

Meinders, V. T., Carleer, B. D. & Huetink, H., 17 Mar 1998, First ESAFORM conference on Material Forming. Sophia Antipolis, France, p. 187-190

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Equivalent drawbead model in finite element simulations

Carleer, B. D., Meinders, V. T. & Huetink, H., 29 Sep 1996, Proceedings of the 3rd International Conference NUMISHEET '96. Dearborn, Michigan, p. 25-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

FEM simulations of the material flow in the bearing area of the aluminium extrusion process

Lof, J., Huetink, H. & Nilsen, K. E., 14 Dec 2000, Proceedings 7th international extrusion technology seminar. Wauconda, Illinois, p. 211-222

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Anisotropic behaviour of sheet material

Vreede, P. T., Streppel, A. H. & Huetink, H., 12 Apr 1994, Proceedings of the Second International Conference on Sheet Metal. Ulster, UK, p. 29-40

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Determination of the yield locus by means of temperature measurement

Huetink, H. & Banabic, D., 2006, ESAFORM 2006. Juster, N. & Rosochowski, A. (eds.). Glasgow: Publishing Hous Akapit, Krakow, p. 359-362 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The analysis of boundary effects in air bending

Streppel, A. H., Carleer, B. D., Koenis, P. T. G. & Huetink, H., 12 Dec 1995, Proceedings of the Third International conference on Sheet Metal: SheMet'95. Birmingham, UK, p. 203-212

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Advanced material models in simulation of sheet forming processes and prediction of forming limits

Vegter, H., An, Y., Pijlman, H. H., Carleer, B. D. & Huetink, H., 17 Mar 1998, First ESAFORM conference on Material Forming. Sophia Antipolis, France, p. 499-502

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite element simulation of sheet forming processes with help of contact elements on small scale workstations

Vreede, P. T., Carleer, B. D., Louwes, M. F. M. & Huetink, H., 31 Aug 1993, Proceedings of the 2nd International conference Numisheet "93. Isehara, Japan, p. 251-260

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review