Search everything

Finite element modelling of concurrent deformation and transformation in metastable steels

Datta, K., Datta, K., Post, J. A., Geijselaers, H. J. M. & Huetink, H., 28 May 2002, ABAQUS World Users Conference. New Port, RI, USA, p. - 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The ALE-method with triangular elements: direct convection of integration point values

van Haaren, M. J., van Haaren, M. J., Stoker, H. C., van den Boogaard, A. H. & Huetink, H., 2000, In : International journal for numerical methods in engineering. 49, 49, p. 697-720

Research output: Contribution to journalArticleAcademicpeer-review

File
11 Citations (Scopus)
68 Downloads (Pure)

The modelling of compression tests with a physically based maerial model using finite elements

Rietman, B., van Liempt, P. & Huetink, H., 12 Mar 1997, Proceedings COMPLAS '97, vol 1. p. 965-972

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Modelling of the plastic behaviour of aluminium alloys and steel for sheet forming

Vegter, H., Drent, P. & Huetink, H., 1 Apr 1996, Sheet Metal '96 Proceedings of the International Conference. Enschede, p. 313-324

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Melt layer in ductile fracture of PP-EPDM blends

Dijkstra, P. T. S., Bosch, M. S., Gaymans, R. J. & Huetink, H., 16 May 1999, Mainz (D)

Research output: Other contributionOther research output

Deformation and fracture of aliphatic polyketones

Zuiderduin, W. C. J., 31 May 2002, Enschede: Universiteit Twente. 372 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

The vegter yield criterion based on multi axial measurements

Pijlman, H. H., Brinkman, J., Huetink, H. & Vegter, H., 26 Jan 1999, Proceedings of Numisheet '99. p. 109-114

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

An optimisation strategy for industrial metal forming processes - Modelling, screening and solving of optimisation problems in metal forming

Bonte, M. H. A., van den Boogaard, A. H. & Huetink, H., 2008, In : Structural and multidisciplinary optimization. 35, 6, p. 571-586

Research output: Contribution to journalArticleAcademicpeer-review

Wrinkling prediction with adapative mesh refinement

Selman, A., Meinders, V. T., van den Boogaard, A. H. & Huetink, H., 14 Dec 2000, Proceedings 3rd ESAFORM Conference on Material Forming. Stuttgart, Germany, p. 19-22

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A planar isotropic yield criterion based on mechanical testing at multi-axial stress states

Vegter, H., Drent, P. & Huetink, H., 18 Jun 1995, Proceedings of the fifth International conference on Numerical Methods in Industrial Forming Processes. Ithaca, New York, USA, p. 345-350

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3D Numerical Simulation of Direct Aluminum Extrusion & Die Deformation

Assaad, W., Geijselaers, H. J. M. & Huetink, H., 13 May 2008, Proceedings ET '08, The conference for innovations in aluminum extrusion. Sanderson, J. (ed.). Orlando, Florida, USA: RET Foundation, p. 7pp.-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Numerical model for penetration in frictional materials

van de Berg, P., de Borst, R. & Huetink, H., 1 Sep 1992, Proceedings 3rd Int.conf. on Comp. plasticity COMPLAS III. p. 971-982 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Deterministic and robust optimisation strategies for metal forming proceesses

Bonte, M. H. A., van den Boogaard, A. H. & Huetink, H., 2007. 9 p.

Research output: Contribution to conferencePaper

File
29 Downloads (Pure)

Elastic Effects at Failure in Polypropylene at High Strain Rates

Dijkstra, P. T. S., van Dijk, D. J. & Huetink, H., 16 Jun 2002, Polymer Processing Society, 18th Annual Meeting (PPS-18). White, J. L. (ed.). Guimaraes, Portugal, p. 197-197 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Implementation of plastic thickness strain in an equivalent drawbead model based on a penalty constraint method

Meinders, V. T., Geijselaers, H. J. M. & Huetink, H., 22 Jun 1998, Proceedings of the 6th International conference on Numerical Methods in Industrial forming processes - Numiform '98. Enschede, p. 911-916

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Prediction of the bendability of sheet metals using nonlocal damage models

Wisselink, H. H. & Huetink, H., 2008, Steel research international, special edition Metal Forming Conference 2008, Vol 1. Pietrzyk, M. (ed.). Verlag Stahleisen GmbH, p. 217-224

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Thoughening of polypropylene with calcium carbonate particles

Zuiderduin, W. C. J., Westzaan, C., Huetink, H. & Gaymans, R. J., 2003, In : Polymer. 44, p. 261-275

Research output: Contribution to journalArticleAcademicpeer-review

Aspects of constitutive relations for cohesionless granular materials

Kruyt, N. P., 11 Mar 1994, Enschede: Universiteit Twente. 142 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

A new displacement based [FE] formulation for steady state problems

Yu, Y., Geijselaers, H. J. M. & Huetink, J., 2001, Simulation of Materials Processing: Theory, Methods and Applications: proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes - NUMIFORM 2001, Toyohashi, Japan, 18-20 June 2001. Mori, K-I. (ed.). Lisse: A.A. Balkema, p. 121-126

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Non-proportional tension-shear experiments in a biaxial test facility

van Riel, M., van den Boogaard, A. H. & Huetink, H., 2006, ESAFORM 2006. Juster, N. & Rosochowski, A. (eds.). Glasgow: Publishing House AKAPIT, p. 323-326 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Different approaches to describe the plastic material behaviour of steel and aluminium-alloys in sheet forming

Vegter, H., An, Y., Pijlman, H. H. & Huetink, H., 27 Jan 1999, Proceedings of Esaform '99. p. 127-132

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Simulation of aluminium extrusion based on a finite element method (FEM)

Mooi, H. G., den Bakker, A. J., Nilsen, K. E. & Huetink, H., 29 Feb 1996, Proceedings International Extrusion conference. p. 67-73

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The analysis of planar anisotropic sheet material

Carleer, B. D., Streppel, A. H., Koenis, P. T. G. & Huetink, H., 1 Apr 1996, Sheet Metal 1996, Proceedings of the International conference. Enschede, p. 193-294

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Thermomechanical contact elements for healing in polymers

Akkerman, R., Rekers, G., Carleer, B. D., Huetink, H., Bulters, M. J. H. & Schepers, H., 16 Dec 1993, First international conference on contact Mechanics '93. Computational Mechnics Publications, p. 103-110

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Mechanical properties of polyketone terpolymer/rubber blends

Zuiderduin, W. C. J., Vlasveld, D. P. N., Huetink, H. & Gaymans, R. J., 2004, In : Polymer. 45, p. 3765-3779

Research output: Contribution to journalArticleAcademicpeer-review

Springback in metal forming

Burchitz, I. A., Meinders, V. T. & Huetink, H., 2004. 1 p.

Research output: Contribution to conferencePaper

File
12 Downloads (Pure)

Springback in Metal Forming, Predictability after forming and trimming

Burchitz, I. A., Meinders, V. T. & Huetink, H., 20 Dec 2004, p. -. 1 p.

Research output: Contribution to conferencePaper

Material modelling of sheet metal by bi-axial loading tests

Pijlman, H. H., Brinkman, J., Huetink, H. & Vegter, H., 1 Dec 2000, Proceedings of IMECE 2000, ASME Internatioanl Mechanical Engineering Congress and Exposition. Orlando, Florida, USA, p. 95-115

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

Tailoring of metastable steels [poster]

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huetink, H., 2006.

Research output: Contribution to conferencePaper

File
10 Downloads (Pure)

Improvement of implicit finite element code performance in deep drawing simulations by dynamics contributions

Meinders, V. T., van den Boogaard, A. H. & Huetink, H., 2003, In : Journal of materials processing technology. 134, p. 413-420 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

Stable incremental deformation of a strip in high strain, Advanced materials research

Hadoush, A., van den Boogaard, A. H. & Huetink, H., 1 Apr 2007, Sheet metal 2007. Micari, F., Geiger, M., Duflou, J., Shirvani, B., Clarke, R., Di Lorenzo, R. & Fratini, L. (eds.). Stafa, Switserland: Trans Tech Publications Ltd, p. 615-620

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)

Blanking by means of the Finite Element Method

van de Moesdijk, R. D., Wisselink, H. H., van den Boogaard, A. H., Huetink, H., Bolt, P. J. & Sillekens, W. H., 29 Jun 1998, 4th International World Congress on Computational Mechanics, IACM '98, uitgegeven op CD-rom. Buenos Aires, Argentine, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Optimizing the Post Sandvik Nanoflex material model using inverse optimization and the finite element method.

van Amstel, T., Groen, M., Post, J. & Huetink, H., 2005, Proceedings of the 8th Esaform Conference on Material Forming. Banabic, D. (ed.). Cluj-Napoca, Romania, p. 167-170

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A process stimulation for air bending

Lutters, D., Streppel, A. H., Huetink, H. & Kals, H. J. J., 11 Dec 1995, Proceedings of the third International Conference on Sheet Metal: SheMet'96. Birmingham, UK, p. 145-154

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

On adaptive mesh refinement in wrinkling prediction analysis

Selman, A., Meinders, V. T., van den Boogaard, A. H. & Huetink, H., 2002, the 5th International ESAFORM conference on Material Forming. Pietrzyk, M., Mitura, Z. & Kaczmar, J. (eds.). Krakow, Poland, p. 551-554

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Efficient implicit FEM simulations of sheet metal forming

van den Boogaard, A. H., Meinders, V. T. & Huetink, H., 7 Apr 2003, 7th International Conference on Computational Plasticity, COMPLAS VII. Onate, E. & Owen, D. R. J. (eds.). Barcelona: CIMNE Barcelona, p. CD-rom-17 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite element simulation of local effects in non-isothermal viscoelastic and viscous flows

Rekers, G., Akkerman, R. & Huetink, H., 1993, Finite elements in fluids. Pineridge press, p. 1093-1102

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Finite element simulation of local effects in nonisothermal viscoelastic flows

Akkerman, R., Rekers, G. & Huetink, H., 1993, Topics in Applied Mechanics. Kluwer Academic Publishers, p. 173-180

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Modelling of ductile failure in metal forming

Wisselink, H. H. & Huetink, J., 14 May 2009, p. 1-10.

Research output: Contribution to conferencePaper

Open Access
File
33 Downloads (Pure)

Modelling of aluminium sheet material at elevated temperatures

Haaren, L., van den Boogaard, A. H. & Huetink, H., 2004. 4 p.

Research output: Contribution to conferencePaper

File
26 Downloads (Pure)

Advanced sheet metal forming

Meinders, T., van den Boogaard, A. H. & Huetink, J., 2003, Proceedings of the 6th ESAFORM Conference on Material Forming: Salerno, Italy, April 28-30, 2003. Brucato, V. (ed.). Salerno, Italy: Nuova Ipsa Editore srl, p. 158-162 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
91 Downloads (Pure)

Convection by means of least squares projection for ALE calculations

Geijselaers, H. J. M. & Huetink, H., 2001, Proceedings of th 4th Esaform conference on Material Forming. Habraken, A. M. (ed.). p. 51-54

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finitie element simulations of aluminium extrusion

Mooi, H. G., 13 Dec 1996, Enschede: Universiteit Twente. 168 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Application of numerical simulation in design and control of forming processes

Huetink, H. & Mooi, H. G., 1994, In : Journal de physique IV. 3, p. 1129-1134

Research output: Contribution to journalArticleAcademicpeer-review

Simulation of thermally assisted forming of aluminum sheet

Kurukuri, S., 24 Jun 2010, Enschede, the Netherlands: Ipskamp Printing. 119 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

The effect of particle size in PP/EPR blends on the brittle/ducitle transition temperature at low and high test speed

van der Wal, A., Gaymans, R. J., Huetink, H. & Dijkstra, P. T. S., 11 Feb 1998, ACS National Meeting, Division of Polymeric Materials: Science & Engineering (PMSE). Boston, USA, p. - 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3D FEM simulations of a shape rolling process

Wisselink, H. H., Huetink, H., Leeuwen, A. & van Dijk, M., 2001, Proceedings of the 4th International ESAFORM Conference on Material Forming. Habraken, A. M. (ed.). p. 843-846

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stable incremental deformation of a strip to high strain

Hadoush, A., van den Boogaard, A. H. & Huetink, H., 2007, In : Key engineering materials. 344, p. 615-620

Research output: Contribution to journalArticleAcademicpeer-review

Wrinkling prediction in sheet metal forming and experimental verification

Meinders, V. T., Selman, A., Atzema, E. H. & Huetink, H., 7 Apr 2003, 7th International Conference on Computational Plasticity, COMPLAS VII. Onate, E. & Owen, D. R. J. (eds.). Barcelona: CIMNE Barcelona, p. CD-rom-9 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review