Search everything

Melth Layer in ductile fracture of PP-EPDM blends

Dijkstra, P. T. S., Bosch, M. S., Gaymans, R. J. & Huetink, H., 16 May 1999, Sixth European Symposium on Polymer Blends. MAINZ (D), p. 71-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Melt layer in ductile fracture of PP-EPDM blends

Dijkstra, P. T. S., Bosch, M. S., Gaymans, R. J. & Huetink, H., 16 May 1999, Mainz (D)

Research output: Other contributionOther research output

Meshless methods and forming processes

Quak, W., van den Boogaard, A. H. & Huetink, H., 27 Apr 2009, In : International journal of material forming. 2, suppl. 1, p. 585-588 4 p.

Research output: Contribution to journalArticleAcademicpeer-review

5 Citations (Scopus)

Meshless methods in Aluminium Extrusion

Quak, W., van den Boogaard, A. H. & Huetink, H., 30 Jun 2008, 8th World Congress on Computational Mechanics and 5th European Congress on Computational Methods in Applied Sciences and Engineering. Schrefler, B. A. & Perego, U. (eds.). Venice, Italy, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Metamodelling techniques for the optimisation of metal forming processes

Bonte, M. H. A., van den Boogaard, A. H. & Huetink, H., 2005. 4 p.

Research output: Contribution to conferencePaper

File
19 Downloads (Pure)

Metamodelling techniques for the optimisation of metal forming processes.

Bonte, M. H. A., van den Boogaard, A. H. & Huetink, H., 2005, Proceedings of the 8th Esaform Conference on Material Forming. Banabic, D. (ed.). Cluj-Napoca, Roemenie: ESAFORM, p. 155-158 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Micromechanical testing of single collagen type I fibrils

van der Rijt, J. A. J., 2004, Enschede: University of Twente. 175 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Open Access
File
65 Downloads (Pure)

Mild wear modeling in the boundary lubrication regime

Bosman, R., 28 Jan 2011, Enschede: University of Twente. 234 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
37 Downloads (Pure)

Mixed Lubricated Line Contacts

Faraon, I. C., 24 Nov 2005, Enschede: University of Twente. 152 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Open Access
File
25 Downloads (Pure)

Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes

Bonte, M. H. A., van den Boogaard, A. H. & Veldman, E., 2007, p. 3-8.

Research output: Contribution to conferencePaper

File
34 Downloads (Pure)

Modelling drawbeads in 3D finite element simulations of the deep drawing process

Carleer, B. D., Louwes, M. F. M., Huetink, H. & Vreede, P. T., 18 Jun 1995, Proceedings of the fifth International conference on Numerical Methods in Industrial Forming Processes. Ithaca, New York, USA, p. 681-685

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Modelling drawbeads with finite elements and verification

Carleer, B. D., Carleer, B. D., Vreede, P. T., Vreede, P. T., Louwes, M. F. M., Louwes, M. F. M. & Huetink, H., 1994, In : Journal of materials processing technology. 45, 1-4, p. 63-68

Research output: Contribution to journalArticleAcademicpeer-review

File
14 Citations (Scopus)
74 Downloads (Pure)

Modelling of a burr-free blanking process

Wisselink, H. H., Klaseboer, G. & Huetink, H., 2009, In : International journal of material forming. 2, Suppl 1, p. 539-542 4 p.

Research output: Contribution to journalArticleAcademicpeer-review

1 Citation (Scopus)

Modelling of aluminium sheet forming at elevated temperatures

van den Boogaard, A. H. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Ghosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 893-898 (AIP Conference Proceedings; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
15 Downloads (Pure)

Modelling of aluminium sheet material at elevated temperatures

Haaren, L., van den Boogaard, A. H. & Huetink, H., 2004. 4 p.

Research output: Contribution to conferencePaper

File
26 Downloads (Pure)

Modelling of ductile failure in metal forming

Wisselink, H. H. & Huetink, J., 14 May 2009, p. 1-10.

Research output: Contribution to conferencePaper

Open Access
File
35 Downloads (Pure)

Modelling of fabric draping: Finite elements versus a geometrical method

Lamers, E. A. D., Wijskamp, S. & Akkerman, R., 2001. 4 p.

Research output: Contribution to conferencePaper

File
23 Downloads (Pure)

Modelling of failure in sheet forming using cohesive elements

Wisselink, H. H. & Huetink, H., 19 Jul 2010, Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian PAcific Congress on Computational Mechanics. Khalili, N., Valliappan, S., Li, Q. & Russell, A. (eds.). Sydney, Australia: Centre for Infrastructure Engineering and Safety, p. 189-190 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
14 Downloads (Pure)

Modelling of the plastic behaviour of aluminium alloys and steel for sheet forming

Vegter, H., Drent, P. & Huetink, H., 1 Apr 1996, Sheet Metal '96 Proceedings of the International Conference. Enschede, p. 313-324

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Modelling the material behaviour of metastable stainless

Datta, K., Geijselaers, H. J. M., Post, J., Beyer, J. & Huetink, J., 2007, Materials processing and design: modeling, simulation and applications: NUMIFORM '07 : proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17-21 June, 2007. César de Sá, J. M. A. & Santos, A. D. (eds.). Melville, NY: American Institute of Physics, p. 655-660 6 p. (AIP Conference Proceedings; vol. 908, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
11 Downloads (Pure)

Morphological Study of Strained Polypropylene

Dijkstra, P. T. S., van Dijk, D. J. & Huetink, H., 16 Jun 2002, Polymer Processing Society, 18th Annual Meeting, (PPS-18). White, J. L. (ed.). Guimaraes, Portugal, p. 160-160 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Mould filling analysis of aluminium extrusion dies

Koopman, A. J., Geijselaers, H. J. M. & Huetink, H., 13 Jun 2010, Numiform 2010 Proceedings of the 10th international conference AIP 1252. Barlat, F., Moon, Y. H. & Lee, M. G. (eds.). Pohang, Korea: American Institute of Physics, p. 290-295 (AIP Conference Proceedings; vol. 1252).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Multiscale friction modeling for sheet metal forming

Hol, J., Cid Alfaro, M. V., de Rooij, M. B. & Meinders, V. T., 13 Jun 2010, Tribology of Manufacturing Processes. Felder, E. & Montmitonnet, P. (eds.). Paris: Transvalor - Presses des MINES, p. 573-582 (Sheet Metal Forming; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
34 Downloads (Pure)

Multi-scale friction modeling for sheet metal forming

Hol, J., 19 Dec 2013, Enschede, The Netherlands: University of Twente. 142 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
212 Downloads (Pure)

Multi-stage metal forming: Variation and transformation

Post, J., Klaseboer, G., Stinstra, E., van Amstel, T. & Huetink, H., 2009, In : Journal of materials processing technology. 209, 5, p. 2648-2661

Research output: Contribution to journalArticleAcademicpeer-review

1 Citation (Scopus)

Nonlinear solid mechanics- een modellenbureau

van den Boogaard, A. H., 26 Nov 2015, Enschede: Universiteit Twente. 36 p.

Research output: Book/ReportInaugural speechOther research output

Open Access
File
30 Downloads (Pure)

Non-proportional deformation paths for sheet metal: experiments and models

van den Boogaard, A. H. & van Riel, M., 5 May 2009, 3rd Forming Technology Forum Zurich 2009 - Constitutive Modeling of Kinematic and Anisotropic Hardening Effects for Ductile Materials. Hora, P. (ed.). Zurich: Institute of Virtual Manufacturing, ETH Zurich, p. 57-62

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
29 Downloads (Pure)

Non-proportional deformation paths for sheet metal - experiments

van den Boogaard, A. H. & van Riel, M., 3 Jan 2010, Finite plasticity and visco-plasticity of conventional and emerging materials. Khan, A. S. & Farrokh, B. (eds.). St. Kitts: NEAT Press, p. 223-225

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
23 Downloads (Pure)

Non-proportional tension-shear experiments in a biaxial test facility

van Riel, M., van den Boogaard, A. H. & Huetink, H., 2006, p. 323-326.

Research output: Contribution to conferencePaper

File
39 Downloads (Pure)

Non-proportional tension-shear experiments in a biaxial test facility

van Riel, M., van den Boogaard, A. H. & Huetink, H., 2006, ESAFORM 2006. Juster, N. & Rosochowski, A. (eds.). Glasgow: Publishing House AKAPIT, p. 323-326 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Notch sensitivity of aliphatic polyketone terpolymers

Zuiderduin, W. C. J., Huetink, H. & Gaymans, R. J., 2004, In : Journal of applied polymer science. 91, 4, p. 2558-2575

Research output: Contribution to journalArticleAcademicpeer-review

7 Citations (Scopus)

Numerical analysis of inhomogeneous deformation in plane strain compression

Rietman, B., 8 Oct 1999, Enschede: Universiteit Twente. 136 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

File
27 Downloads (Pure)

Numerical and physical modelling in forming

Huetink, H., van den Boogaard, A. H., Geijselaers, H. J. M. & Meinders, V. T., 14 Dec 2000, Proceedings 3rd ESAFORM Conference on Material Forming. Stuttgart, Germany, p. 8-13 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
20 Downloads (Pure)

Numerical flow front tracking for aluminium extrusion of a tube and a comparison with experiments

Koopman, A. J., Geijselaers, H. J. M., Nilsen, K. E. & Koenis, P. T. G., 2008. 4 p.

Research output: Contribution to conferencePaper

File
1 Citation (Scopus)
39 Downloads (Pure)

Numerical forming simulations and optimisation in advanced materials

Huetink, J., van den Boogaard, A. H., Geijselaers, H. J. M. & Meinders, T., 2007, Materials processing and design: modeling, simulation and applications: NUMIFORM '07 : proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17-21 June, 2007. César de Sá, J. M. A. & Santos, A. D. (eds.). Melville, NY: American Institute of Physics, p. 281-286 (AIP Conference Proceedings; vol. 908, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

37 Downloads (Pure)

Numerical model for penetration in frictional materials

van de Berg, P., de Borst, R. & Huetink, H., 1 Sep 1992, Proceedings 3rd Int.conf. on Comp. plasticity COMPLAS III. p. 971-982 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Numerical modelling of Aluminium extrusion

Lof, J. & Huetink, H., 11 Feb 1998, 1 p. Kerkrade

Research output: Other contributionOther research output

File
12 Downloads (Pure)

Numerical modelling of shape aberrations due to blanking

van de Moesdijk, R. D., 10 Dec 1999, Enschede: Universiteit Twente. 168 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Numerical product design: Springback prediction, compensation and optimization

Meinders, V. T., Burchitz, I. A., Bonte, M. H. A. & Lingbeek, R. A., 2007, In : International journal of machine tools & manufacture. 48, 5, p. 499-514

Research output: Contribution to journalArticleAcademic

File
112 Citations (Scopus)
69 Downloads (Pure)

Numerical simulation of forming processes using an arbitrary Lagrangian Eulerian finite element method

van den Boogaard, A. H. & Huétink, J., 1994, DIANA Computational Mechanics ‘94: Proceedings of the First International Diana Conference on Computational Mechanics. Kusters, G. M. A. & Hendriks, M. A. N. (eds.). Kluwer, p. 225-234

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
12 Downloads (Pure)

Numerical Simulation of Stresses due to Solid State Transformations : The Simulation of Laser Hardening

Geijselaers, H. J. M., 2003, Enschede. 125 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Open Access
File
88 Downloads (Pure)

Numerical simulation of the aluminium extrusion process

Lof, J. & Huetink, H., 26 Jan 1999, Proceedings of the 2nd ESAFORM Conference on Material Forming. p. 29-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Numerical simulation of unsteady viscoelastic flow of polymers

Rekers, G., 29 Sep 1995, Enschede: Universiteit Twente. 174 p.

Research output: ThesisPhD Thesis - Research UT, graduation UT

Numerical Trimming Operation with Respect to Springback

Avetisyan, M., 2004, Netherlands Institute for Metals Research. 73 p. (NIMR report)

Research output: Book/ReportReportOther research output

File
17 Downloads (Pure)

Object oriented design of a thermo-mechanical FEM code

van den Boogaard, A. H., van Vliet, N. & Huetink, H., 1998. 17 p.

Research output: Contribution to conferencePaper

File
96 Downloads (Pure)

Object oriented design of a thermo-mechanical FEM code

van den Boogaard, A. H., Vliet, N. & Huetink, H., 29 Jun 1998, 4th International World Congres on Computatinal Mechanics, IACM '98, uitgegeven op CD-Rom. Buenos Aires, Argentine, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Oil-free piston compressors

Owczarek, P., Geijselaers, H. J. M. & Huetink, J., 11 Oct 2007, p. P45-P45. 1 p.

Research output: Contribution to conferencePoster

Open Access
File
3 Downloads (Pure)

On adaptive mesh refinement in wrinkling prediction analysis

Selman, A., Meinders, V. T., van den Boogaard, A. H. & Huetink, H., 2002, the 5th International ESAFORM conference on Material Forming. Pietrzyk, M., Mitura, Z. & Kaczmar, J. (eds.). Krakow, Poland, p. 551-554

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

On adaptive mesh refinement in wrinkling prediction analysis

Selman, A., Meinders, V. T., van den Boogaard, A. H. & Huetink, H., 2002. 4 p.

Research output: Contribution to conferencePaper

File
12 Downloads (Pure)

On Anisotropy, Objectivity and Invariance in Finite thermo-mechanical deformations

Huetink, H., 26 Apr 2006, ESAFORM 2006. Juster, N. & Rosochowski, A. (eds.). Glasgow: Publishing House AKAPIT, p. 355-358 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review